Comfort roller blind

Our products are made to measure. Enter the desired width and height of your blind and we will take care of the rest. Use a dot for decimal values, for example 120.5. You don't have to take into account any margins, we will calculate them ourselves. Please note! Before you start measuring, pay attention to any obstacles such as door and/or window fittings that protrude, heating pipes or inward-turning doors and windows.

Want to know how to measure? Check out our measuring instructions!

1. Option A: Determine dimensions for mounting inside the recess
   

   Measure the width at the top of the window recess and measure the height at the middle of the window recess. Please note! We supply the blind with a 3 mm reduction on both sides. So don't do any reductions yourself! Please also note a system height of 100 mm for possible obstacles such as doors and windows turning inwards.

Please note that the width size given is the size of the system. The fabric is always narrower than the system, see this article for more information.
2. Option B: Determine dimensions for mounting outside the recess
   

   Measure the width and height of the window recess, with a small overlap. We recommend an overlap of 5 cm on both sides. Add a total of 10 cm to the width measurement. To determine the height, add 10 cm (height of system) to the height of your window recess. Do you want your blind to continue downwards? Then decide how many extra centimetres you want in height.

Our products are made to measure. Enter the desired width and height of your blind and we will take care of the rest. Use a dot for decimal values, for example 120.5. You don't have to take into account any margins, we will calculate them ourselves. Please note! Before you start measuring, pay attention to any obstacles such as door and/or window fittings that protrude, heating pipes or inward-turning doors and windows.

Want to know how to measure? Check out our measuring instructions!

1. Option A: Determine dimensions for mounting inside the recess
   

   Measure the width at the top of the window recess and measure the height at the middle of the window recess. Please note! We supply the blind with a 3 mm reduction on both sides. So don't do any reductions yourself! Please also note a system height of 100 mm for possible obstacles such as doors and windows turning inwards.

Please note that the width size given is the size of the system. The fabric is always narrower than the system, see this article for more information.
2. Option B: Determine dimensions for mounting outside the recess
   

   Measure the width and height of the window recess, with a small overlap. We recommend an overlap of 5 cm on both sides. Add a total of 10 cm to the width measurement. To determine the height, add 10 cm (height of system) to the height of your window recess. Do you want your blind to continue downwards? Then decide how many extra centimetres you want in height.

You can choose to hang your blind inside the recess or outside the recess:

1. Inside the recess
   
   If you hang the roller blind inside the recess, it is mounted between the walls of your window. With this choice, we therefore supply your blind with a 3 mm reduction on both sides.
2. Outside the recess
   
   If you hang the blind outside the recess, it is mounted on the wall and hangs over the window with overlap on both sides.

Want to know more about how to measure? View our measurement instructions here

By choosing a motor side, you determine on which side you want to operate and charge your Smartblinds. If you choose the left side, the motor, pull-down controller and charging port are located on the left side of the product. Would you like this to be on the right-hand side? Then choose right.

Here you can fill in a reference for your assembled blind. That way you will soon know exactly which product is for which window in your house!

When you are looking for window coverings, it is important to determine beforehand what transparency you want in certain rooms. In bedrooms, for example, more blackout is usual than in the living room. Smartblinds fabrics can be divided into three different transparencies:

Blackout

Opacity: none - Light from outside is completely blocked and has no possibility to illuminate rooms.

Light filtering

Opacity: limited - Light from outside is obstructed, but not completely blocked.

Sheer

Opacity: full - Light from outside finds its way in, but the fabric offers the desired privacy.

Your blinds should, of course, match your interior. The colour and look of fabrics and materials can sometimes differ from reality from a screen or due to differences in light transmission. We therefore always recommend requesting free fabric samples in advance, so you can assess the fabric (colour) in real life!

Our systems are available in two sizes, small and large. The small system is suitable for small to medium-sized roller blinds. For large sized blinds, only a large system is possible. Our advice is to start by putting together the roller blind for your largest window in the house. If it turns out that you can only choose a large system for this blind, we recommend doing the same for the rest of your Smartblinds. This way you avoid having multiple Smartblinds in your home with different systems. Is your largest product also suitable for a small system? Then choose the system size that you prefer.

Below you will find the system height of the various systems, so that you can take this into account when ordering. Are you mounting your product in the window, but do you have a window that opens inwards? Then you can use this to check whether you have enough room for this.

Dimensions bracket system large:

Dimensions cassette system large:

For the roller system of your blind, Smartblinds offers you a choice of two different types:

Brackets

Cassette

The pictures you see above are of our motorised systems. The systems of our chain-operated products are the same but have different system dimensions!

Our systems are available in white, grey, anthracite and black.

Colour information:

• White = RAL 9003
• Grey = RAL 7004
• Anthracite = RAL 7016
• Black = RAL 9011